Friday, November 15, 2019

Ultrasound Imaging Systems

Ultrasound Imaging Systems 1.1 INTRODUCTION An ultrasound scans also known as ultrasonography. Ultrasound will form the image by scanning using the high frequency sound waves. This device suitable to evaluate some part inside of the body. In physics, ultrasound is a sound with a frequency humans cannot hear. In diagnostic sonography, the ultrasound is usually between 2 and 18 MHz. (Anon 2012) 2.0 THE ULTRASOUND IMAGING SYSTEM Figure 1 : The principal functional components of an ultrasound imaging system.(Perry Sprawls n.d.) 2.1 TRANSDUCER The ultrasound transducer converts an electrical signal into the ultrasound beam. The signal transmitted into the patient’s body, and then alters the returning echo into an electrical signal for processing and display. It use single-element circular disk to both transmit and receive ultrasound. (Hedrick et al. 2005) 2.1.1 CONSTRUCTION OF TRANSDUCER Crystal of piezoelectric material with electrodes is the main part of the transducer. The electrodes are formed by plating a thin film of gold or silver on the crystal surface. The matching layer is located adjacent to the electrodes. The function is to improve the transfer of energy to and from the patient. All this part of the transducer is placed in an electrically insulating casing. This casing will give structural support. An acoustic insulator is made of rubber or cork it works to prevents the transmission of ultrasound energy into the casing. (Hedrick et al. 2005) 2.1.1.1 PIEZOELECTRIC MATERIALS When we change the transducer it will change the frequency too. A higher frequency transducer that produces a shorter wavelength has a thinner crystal. Normally the material that always almost used in transducer is lead zirconate titanate (PZT). PZT represents a piezoelectric ceramics with various extracts. It will change the properties to equal a particular application. In medical, PZT-5 is used because it has the properties of high electromechanical coupling coefficient, high dielectric constant, and ability to be formed in a particular size and shape. (Hedrick et al. 2005) 2.1.1.2 BACKING MATERIAL The functions of backing material will deliver the maximum amount of energy in the form of heat to the patient. This is will give a continuous output of ultrasound waves from the transducer. The other function is to absorb all the energy except for the one cycle of sound. Meaning’s that one that produced from the front face of the transducer. Backing materials should have acoustic impedance so that maximum energy transfer will occur. Besides that, backing material should have a high absorption coefficient. This is to prevent ultrasonic energy from reentering the crystal. In the backing material, they will use an epoxy resin and tungsten powder combination to damp the ultrasonic pulse. Next, the rear surface of the backing materials is slanted to prevent reflection of sound energy into the crystal. (Hedrick et al. 2005) 2.1.1.3 MATCHING LAYER The matching layer is placed in the transducer on the exit side of the crystal. This material with acoustic impedance is placed between the crystal and the patient. The function of the acoustic impedance to produced ultrasonic energy to be largely reflected at this interface. This creates a long pulse and reduces the beam intensity that enters the patient, which is we did not want it in the ultrasound. The reason why we need the matching layer is to shorten the pulse and the improve energy transfer across the crystal-tissue interface. However, the matching layer must have low-loss properties since high attenuation would stabilize the desired effect of high transmission. (Hedrick et al. 2005) 2.2 PULSE GENERATOR The pulse generator produces the electrical pulses. The size of the electrical pulses can be used to change the intensity and energy of the ultrasound beam. (Perry Sprawls n.d.) 2.3 AMPLIFICATION After the echo is received by the transducer, amplification is used to intensification the size of the electrical pulses. Gain setting will controls the amount of amplification. The time gain compensation function is to alter the increase in relationship to the distance of echo sites inside the body. (Hedrick et al. 2005) 2.4 SCAN GENERATOR Controlling the scanning of the ultrasound beam is done by the scan generator. The way is by control the procedure when electrical pulses are functional to the piezoelectric elements in the transducer. (Perry Sprawls n.d.) 2.5 IMAGE PROCESSOR The digital imageis to produce the chosenforms for display. This includes giving it specific contrast characteristics and reformatting the image. (Perry Sprawls n.d.) 2.6 DISPLAY The digital ultrasound images are observed on the monitor and transmitted to work station. The other part of the ultrasound system is the digital storage device. The function is to store images for later viewing.(Perry Sprawls n.d.) 3.0 THE ULTRASOUND PULSE Figure 3 : The production of the ultrasound pulse. (Perry Sprawls n.d.) 4.0 ULTRASOUND CHARACTERISTIC 4.1 FREQUENCY Frequency is the number of wave cycles passing a given point in a given increase of time. The unit is cycles/ second or hertz. Frequency is the inverse of the period. (Hedrick et al. 2005) Figure 4 : The ultrasound pulse frequency. (Perry Sprawls n.d.) 4.2 VELOCITY Velocity is the rate and direction at which sound propagates through a medium. The average velocity of sound in soft tissue is 1540 m/s. (Hedrick et al. 2005) Figure 5 : The ultrasound of velocity. (Perry Sprawls n.d.) 4.3 WAVELENGTH Wavelength is a physical characteristic of a wave that is the distance for one complete wave cycle. (Hedrick et al. 2005) Figure 6 : The wavelength of the ultrasound. (Perry Sprawls n.d.) 4.4 AMPLITUDE Amplitude used to refer to the particle displacement, particle velocity or acoustic pressure of a sound wave. Amplitude also show the strength of the detected echo or the voltage induced in a crystal by a pressure wave. (Hedrick et al. 2005) 5.0 INTENSITY AND POWER Intensity is a physical parameter that describes the amount of energy flowing through a unit cross-sectional area of a beam each second. This is the rate at which the wave transmits the energy over a small area. The unit of intensity is the watt per square centimeter or joule per second per square centimeter. (Hedrick et al. 2005) Power is a measure of the total energy transmitted summed over the entire cross-sectional area of the beam per unit time. The unit of power is the watt. (Hedrick et al. 2005) 5.1 TEMPORAL CHARACTERISTICS As the transducer emits pulses, it causes large instabilities of intensity in the region through which the pulse move. Each pulse consists of multiple cycles that produce intensity variations within the pulse itself-the maximum intensity, designated temporal peak (TP). Pulse average (PA) will controls the intensity averaged over the duration of a single pulse. Temporal average (TA) will controls the intensity averaged over the longer interval of the pulse repetition period. The TA intensity is related to the PA intensity by the duty factor (DF): TA = DFÃâ€"PA or by the pulse duration (PD) and pulse repetition frequency (PRF):TA =PD Ãâ€" PRF Ãâ€" PA.(Hedrick et al. 2005) 5.2 SPATIAL CHARACTERISTICS The maximum intensity of all measured values within the sound field is designated as the spatial peak (SP). The designation of spatial peak is not well-defined. In some applications it refers to the maximum intensity in a plane perpendicular to the beam axis at a particular distance from the transducer. The maximum intensity throughout the ultrasonic field which usually occurs along the beam axis. The focusing of the transducer is the most important determinant of spatial peak.(Hedrick et al. 2005) 5.3 TEMPORAL/SPATIAL COMBINATION Spatial averaging over the cross-sectional area of the beam for each temporal intensity is also specified. A cutoff point of 0.25 times the SP intensity has been established to the limit area over which the intensity is averaged. These three combinations are possible to happen are I(SATP)-spatial average, temporal peak intensity, I(SAPA)-spatial average, pulse average intensity and I(SATA)-spatial average, temporal average intensity.(Hedrick et al. 2005) 6.0 INTERACTIONS OF ULTRASOUND Figure 7: The interaction within a body of ultrasound (Perry Sprawls n.d.). 6.1 ABSORPTION AND ATTENUATION Absorption is the procedure whereby energy is placed in a medium by converting ultrasonic energy into other energy forms, primarily heat. It is an exponentially decreasing function and is the major factor in the total attenuation of the beam. (Hedrick et al. 2005) Attenuation is the decrease in intensity as a sound beam travels through the medium. Attenuation depends on all the interactions of ultrasound with tissues which include scattering, divergence, and absorption. (Hedrick et al. 2005) Scattering is the rerouting of sound energy resulting from the sound beam striking an interface whose physical dimension is less than one wavelength. It is also called non specular reflection. (Hedrick et al. 2005) 6.2 REFLECTION Reflection is an interaction that results when the sound being redirected into the medium after striking an acoustic interface. The angle of incidence equals the angle of reflection. The intensity of the reflected wave is depends on the composition of the interface. (Hedrick et al. 2005) 6.3 REFRACTION Refraction is a process whereby sound enters one medium from another that will result in a bending or deviation of a sound beam from the predictable straight-line path. Refraction obeys Snell’s law, which is based on the ratio of the velocity of the sound in the respective media. Refraction will make artifacts in the image by the misregistration of structures (Hedrick et al. 2005) 7.0 PULSE DIAMETER AND BEAM WIDTH A low-Q transducer has a short pulse length and a broad bandwidth while a high-Q transducer has a long pulse length and narrow bandwidth. The objectives beam width is to transmit a beam that would be directional with a narrow beam width. An echo is created anyway of the lateral position of the object in the ultrasonic field. The lateral dimension of the object in the image is defined as the same size as the beam width. Multiple small objects equidistant from the transducer are not resolved when encompassed by the beam. Focusing reduces the beam width at specific depth to enhance the spatial mapping of received echoes.(Ding et al. 2014) Sampling is restricted laterally by the width of the beam. Objects located outside the beam do not contribute signals. (Small 1971) 7.1 TRANSDUCER FOCUSSING The focusing transducer made-up with an indented active element exhibits much broader bandwidth and higher sensitivity. To fabricate focusing transducers, we can add a lens and shaping the piezoelectric element. Among the focusing transducer designing methods, the shaping element used in transducers was reported to be much effective for fabricating high sensitivity device. Hard pressing and pressure defection techniques are the usual ways to shape transducer elements. For the flexible composite and polymer materials, the focusing transducer can be easily fabricated using those techniques.(Chen et al. 2013) Figure 8: The width and pulse diameter characteristics of both unfocused and focused transducer. (Perry Sprawls n.d.) 7.2 ADJUSTABLE TRANSMIT FOCUS Transmit focusing happen when the depth of the focal zone is altered by varying the delay times between crystal excitations. (Wright 1997)The scanning of the region of interest is conducted with a depth of focus selected by the operator. After review of the real-time image, a new focal zone may be certain to rescan the same area with dissimilar focusing in the scan plane. The beam is focused to a new depth simply by changing the delay times. The transducers that have the capabilities of this focusing are phased linear arrays. (Kossoff Eng 2000)Electronic phasing of the elements allows variable focusing along the scan line which in turn controls beam width in the plane direction. High resolution images with multiple focal zones throughout the images are also possible using this adjustment delay lines. Multi zone transmit focusing reduces the frame rate, because the data must be composed for all the lines of sight across the array with a set focal zone depth before the lines of sight are repetitive with a different focal zone depth. 7.3 DYNAMIC RECEIVE FOCUS Dynamic focusing is in the receive mode. It does will reduce the effective sampling volume.(Kossoff Eng 2000) Dynamic focusing will operate at all depths. The wave front from the object appears to be in phase for all the crystals resulting in a focused beam from the depth of interest. Beam formation is the delay and sum of strategy. The master synchronizer sends timing messages to the receiver-delay lines to indicate the elapsed time from transmission to reception. The elapsed time determines the delay times for each crystal. The depth for receive focus is always known, and thus receive-delay times are constantly changed to yield continually focused beam at all depths. During acquisition of image data the receive times delays are varied dynamically to sweep the focal zone to each point along the scan line. (Hedrick et al. 2005) 8.0 CONCLUSION In ultrasound, high frequencies provide better quality images, but cannot penetrate through skin and organ deeply. Low frequencies can penetrate deeper, but the image quality is poor. Ultrasound is useful to view part inside of the body. They may also be useful in helping the surgeon when carrying out some types of biopsies. Ultrasound is a one of the safe procedure in imaging department.

Wednesday, November 13, 2019

Computer Programming :: essays research papers fc

Computer Programming Choosing to do a research on a career can be a little easier to do when you have some or a general knowledge a particular field of work. There are many different types of jobs one can decide to undertake, one of which is in the most popular line of work today: Computer Programming. Although this line of work might seem a little tiresome but you might find it enjoyable by people with lots of patience and the will to do long and tidious work. Most programmers in large corporations work in teams, with each person focusing on a specific aspect of the total project(AOL). Programmers write the detailed instructions for a computer to follow. A computer programmer carefully studies the program that best suits the employer needs. They may also work for a large computer corporation developing new software and/or improving older versions of these programs. Programmers write specific programs by breaking down each step into a logical series of hours of writing programs, the programmer must follow. After long hours of writing programs, the programmer must thoroughly testing and revising it. Generally, programmers create software by using the following a basic step-by-step development process: (1) Define the scope of the program by outlining exactly what the program will do. (2) Plan the sequence of computer operations, usually by developing a flowchart (a diagram showing the order of computer actions and data flow). (3) Write the code--the program instructions encoded in a particular programming language. (4) Test the program. (5) Debug the program (eliminate problems in program logic and correct incorrect usage of the programming language). (6) Submit the program for beta testing, in which users test the program extensively under real-life conditions to see whether it performs correctly(AOL) Programmers are grouped into two types: Application programmers and systems programmers. These programmers write the software that changes a basic machine into a personal tool that not only is useful for increasing productivity but also be fun and entertain the user. Applications programmers write commercial programs to be used by businesses, in scientific research centers, and in the home. Systems programmers write the complex programs that control the inner-workings of the computer. Application programmers are focused primarily on business, engineering, or science tasks, such as writing a program to direct the guidance system of a missile to its target (Information Finder). A systems programmer maintains the software that controls the operation of the entire computer system. They make changes to the instructions that controls the central processing unit, in turn, controls the computers hardware itself(FL View #475). They also help application programmers determine the source of problems that may occur with their programs. Computer Programming :: essays research papers fc Computer Programming Choosing to do a research on a career can be a little easier to do when you have some or a general knowledge a particular field of work. There are many different types of jobs one can decide to undertake, one of which is in the most popular line of work today: Computer Programming. Although this line of work might seem a little tiresome but you might find it enjoyable by people with lots of patience and the will to do long and tidious work. Most programmers in large corporations work in teams, with each person focusing on a specific aspect of the total project(AOL). Programmers write the detailed instructions for a computer to follow. A computer programmer carefully studies the program that best suits the employer needs. They may also work for a large computer corporation developing new software and/or improving older versions of these programs. Programmers write specific programs by breaking down each step into a logical series of hours of writing programs, the programmer must follow. After long hours of writing programs, the programmer must thoroughly testing and revising it. Generally, programmers create software by using the following a basic step-by-step development process: (1) Define the scope of the program by outlining exactly what the program will do. (2) Plan the sequence of computer operations, usually by developing a flowchart (a diagram showing the order of computer actions and data flow). (3) Write the code--the program instructions encoded in a particular programming language. (4) Test the program. (5) Debug the program (eliminate problems in program logic and correct incorrect usage of the programming language). (6) Submit the program for beta testing, in which users test the program extensively under real-life conditions to see whether it performs correctly(AOL) Programmers are grouped into two types: Application programmers and systems programmers. These programmers write the software that changes a basic machine into a personal tool that not only is useful for increasing productivity but also be fun and entertain the user. Applications programmers write commercial programs to be used by businesses, in scientific research centers, and in the home. Systems programmers write the complex programs that control the inner-workings of the computer. Application programmers are focused primarily on business, engineering, or science tasks, such as writing a program to direct the guidance system of a missile to its target (Information Finder). A systems programmer maintains the software that controls the operation of the entire computer system. They make changes to the instructions that controls the central processing unit, in turn, controls the computers hardware itself(FL View #475). They also help application programmers determine the source of problems that may occur with their programs.

Sunday, November 10, 2019

Challenges Facing Public Schools Essay

The fundamental purpose of education is to gain knowledge, inculcate the forms of proper conduct and acquire technical competency, (Oak, 2010). These skills and abilities are considered important in our world so as to have socio-economic growth and development individually and in the community. Goel (2007) observes that it is because education is so important that the US Department of Education aims to promote student achievement and preparation for global competitiveness by fostering educational excellence and ensuring equal access. Thus in countries such as the US, children who may not be able to afford the cost of schooling can access education in public educational institutions subsidized by the government. Though noble, the concept of public education unfortunately has a number of fundamental challenges that must be investigated for lasting solutions. These challenges are highlighted below, their problem statements and the arising hypotheses: Problem Statement 1 One of the greatest concerns in public schools is violence. Lede (2010) notes that violence in public schools is a growing concern of parents, teachers, school administrators, politicians and community leaders. Lede (2010) continues to observe that â€Å"many communities in the United States of America are faced with the dilemma of how to protect the integrity of the education by eliminating violent behavior among the school’s constituency and the environment where learning takes place. † What are the determinants of violence in public schools? What is the effect of parental involvement and violence in public schools? Is there any relationship between poor teacher training and violence in public schools? Hypothesis Economic and social issues are affiliated with violence in public schools. Parental socialization at the home front influences students’ propensity to violence in public schools. Teacher training does not impact on the existence of violence in public schools. Importance of the statements and hypothesis in the research The statements and hypotheses in this research would assist the researcher in investigating the problem of violence in public schools and begin to explore solutions that address the root cause of the problem and not the symptoms of the problem Problem statement 2  Another one of the core challenges faced by public educational institutions is that of insufficient funds. By virtue of the fact that public schools depend on the government to meet their budgets, more often than not, the schools find themselves without enough money to carry out their activities. What is the effect of lack of sufficient funding on the quality education in public schools? What is the effect of programme prioritization on budget management in public schools? What are other sources of funding that can be explored to ensure constant funding of public schools programmes? Hypothesis Lack of sufficient funds compromises on the quality education offered in public schools. Budget rationalization can be successfully achieved through programme prioritisation of the programmes at public schools. Diversification of the sources of funding to meet budgetary needs at public schools has ensured sustainability of the schools’ programmes. Importance of the statements and hypothesis in the research A research on this issue would ensure that sustainable solutions to budgetary constraints are met that translate to operational efficiency (Maguad, 2007) and a high quality of education is constantly high in public schools. Problem statement 3 Public institutions of learning are faced by the problem of low or no parental involvement. Since many of the students in public schools come from middle and working classes in which both parents have to earn a living to sustain the families, it is rare that the parents find time to be actively involved in their children’s school life. What is the effect of parental involvement on student achievement in public schools? What is the correlation between parental aspirations and expectations for their children and student achievement in public schools? Do parents give away the right to educate their children when they place them in public schools? Hypothesis A student’s performance is influenced by his/her parents’ interest and participation in his school work. Parental aspiration and expectation for children determines the achievements of the children in school. Parents of children in public schools forfeit any right to determine what or how their children are educated. Importance of the statements and hypothesis in the research The research would find out whether parents have an active role to play in their children’s well being for assured achievement in school. The issue of parental involvement could also form the basis of understanding other challenges facing public schools such as student violence (Alliance for the Separation of School & State, 2008). In conclusion, public educational institutions experience many challenges ranging from budgetary constraints, student violence and low parental involvement. Much research needs to be done to establish why these problems exist in the first place and lasting solutions for these institutions.

Friday, November 8, 2019

Writers that Influenced our Go essays

Writers that Influenced our Go essays Writers that Influenced our Government Locke and Rousseau were two philosophers who both wrote about human nature. Both philosophers agreed that before civilized man began to govern himself, man existed in a state of nature. These philosophers recognized that people develop a social contract within their society. Even though Locke and Rousseau each had different views on what exactly the social contract is and how it is established, they both agreed that certain freedoms had been surrendered for societys protection and that the government has definite responsibilities to its citizens. They both agreed that before men came to govern themselves, they all existed in a state of nature. The state of nature is the condition men were in before political government came into existence, and what society would be if there was no government. John Locke was born at Wrington, Somerset, on August 29, 1932. He had attended the University of Oxford. Locke had spent his boyhood in Beluton, near the village of Pensford. John Locke was an Oxford scholar, medical researcher and physician, politician, and economist. John Locke was the man who presented the idea of separation of church and state. . Jean Jacques Rousseau was born on June 28, 1712 in Geneva, Switzerland. His mother died shortly after his birth, and when he was a boy of ten years his father fled the county to escape criminal charges. His aunt and uncle raised him until the age on sixteen, when he left Geneva and wandered from place to place. He eventually settled in Paris in 1742, earning a living by doing all jobs from footman to an assistant to an ambassador of church and state. Rousseau's most important work is "The Social Contract" that describes the relationship of man with society Even though both Locke and Rousseau agreed that man is free naturally, Locke argued that the state of nature lacked impartial judges, precise laws, and sufficient power to uphold moral. It is ...

Wednesday, November 6, 2019

Dubois vs. Washington essays

Dubois vs. Washington essays Booker T. Washington and W.E.B. Dubois were among two of the most influential black leaders that strove to attain racial equality for African Americans during the early twentieth century. Although both Washington and Dubois sought to advance civil rights for African Americans, each stressed a contrasting philosophy as to how to achieve their goal (Taylor). Heeding the belief that blacks would be granted civil and political rights after gaining economic independence, Washington urged blacks to temporally set aside their desire for equality and work toward economic advancement. Washington captured this philosophy cleverly in the phrase: In all things that are purely social we can be as separate as the fingers, yet one as the hand in all things essential to mutual progress (Harlan). He was thus of the belief that blacks should remain separate yet equal and promoted the temporarily acceptance of segregation in exchange for economic advancement (Salley). In accordance his philosophy, Washington also maintained that a vocational education, rather than a college education, was the quickest route to economic success for blacks. He held that the development of practical work skills would give blacks an upper hand in seeking employment (Taylor). To foster his beliefs, Washington founded the Tuskegee institute in Tuskegee, Alabama, which trained thousands of black people in industrialized trades such as farming, blacksmithing, plumbing, carpentry, and mechanics (Taylor). White America was largely in support of Washingtons philosophy, as they viewed his outward acceptance of segregation and his opposition to black militancy as a means of encouraging blacks to face their inferior social status. Whites therefore hailed Washington as a representative for all of black America in dealing with racial issues (Salley). Among the black populous of America, Washingtons philosophy was also well received. It was ac...

Monday, November 4, 2019

Interview paper Assignment Example | Topics and Well Written Essays - 1000 words

Interview paper - Assignment Example noted that she didn’t consider herself as a religious person, because she believed that religion and church were secondary things and her faith was the most important for her. However, she called herself Presbyterian, as she has been raised in this religion confession by her parents and just got used to identify herself with it. Presbyterian Church is one of the most numerous Protestant confessions on the territory of the United States. Alabama State, where Sarah lives with her family, is mostly inhabited by Protestants and Presbyterian Church commands a large part of protestant population of the state (Balmer & Winner 290). When we started talking about the religion itself Sarah said that there was a time when she considered changing her religion into Catholicism, because it seemed to her that a religion should bring discipline and she believed that it must have more rituals and religious traditions. However, in some time she realized that the main advantage of her religion was that it didn’t require any mediums and even didn’t require attending church in order to connect with the Lord. Presbyterian Church has two main ritual ceremonies which are the ceremony of Christianizing and the blessed ordinance (Balmer & Winner 290). Sarah was Christianized when she turned 21, as according to her church tradition, each parishioner should come to Jesus by oneself and the ceremony is supposed to symbolize start of the relationships between the Lord and a person. Thus when she was 21 years old Sarah realized that she was ready to establish these relationships and that she was absolutely sure about the fact that her faith was not going to be changed ever. Concerning the roots of her faith Sarah is considered to have very typical for Protestantism beliefs about God and His place in her life. She believes that her faith is guided by Holy Bible and that what is written there is the absolute truth. Whenever Sarah doesn’t know what to do in any situation of her life,

Friday, November 1, 2019

CRM Project Paper Rubric Spring Semester 2013 Essay

CRM Project Paper Rubric Spring Semester 2013 - Essay Example There are several ways of using these technologies and information systems. The common applications include the customer relationship management systems, electronic marketing, and social networking among others. The field of customer relationship management presents a lot of opportunities. The systems and operations of CRM implement the company’s goals and objectives for customer access, interactions sales and other services. With the developments in the field of information technology, there is the possibility to merge the CRM and other technologies such as social networking. This provides a greater opportunity for marketing and customer interaction at a cheaper and more affordable cost. Organizations and businesses are increasingly adopting customer relationship management (CRM) systems in order to improve their interactions with customers (Rigby et al. 2002). The CRM systems management application is used to manage customer interactions by integration of processes that are customer oriented like customer service and sales. The CRM systems are not only used in automation of these processes for cost reduction but also collection and analysis of customer information with the aim of better fulfilling customer needs and improve customer satisfaction(Karimi et al. 2001). However, different businesses have experienced different outcomes in the business by investing in CRM. Some have been successful in leveraging CRM systems to facilitate their operations, and customer relationships, cost efficiency, product and service quality, which increases company profitability. Other businesses have not realized the benefits that come with CRM in their businesses; this could be attributed to poor research before the implementation of the system. More importantly it is due to the drawbacks that come with the use of CRM systems and poor implementation. It is necessary to research more into this field to identify these pitfalls and to identify the benefits of using CRM and how long these benefits can be realized. Introduction This paper focuses on the suitable tools that can be used to design, build and implement the customer relationship management system. Woolworths Homeshop Company. Human resource information system is a system that is used to automate the activities that are carried out the human resource department in an organization. During this process the objective of the business and plan is converted into suitable enterprise conversions through building and exchange; and embracement of the primary needs, principle and forms that explain the company’s development state and facilitate transition. The proposal is to launch an integrated CRM for Woolworths Homeshop. Woolworths Homeshop Company sells high quality fast food delivering all around the city. The company needs to manage its business operation using a computerized CRM. The company wants to implement a CRM as an initial step towards achieving e-business (Chaturvedi 65). E-busine ss is a business which allows the customers to sell trade and barter over the Web. The company’s policy, operations, technology and ideology define its business model. Woolworths Homeshop is a company is based in Dubai. The services that are offered by this firm include selling headphones and other sound product The Company has been operating at average. This applies the technology that has the first in the field of e-business Tanner et al notes that the advancement in technology